Alles

For operating the fire detectors in critical environmental conditions, when there is icing or there is a risk of condensation, e.g. B. for cold st...

The air sample smoke detection set is a passive monitoring system without its own fan. It uses the pressure differences in the ventilation system...

For taking air samples from ventilation ducts with a diameter of 100…600 mm Data sheet A6V10405166 Length 0.6 m

For taking air samples from ventilation ducts with a diameter of 600…1400 mm Data sheet A6V10405166 Length 1.4 m

For taking air samples from ventilation ducts with a diameter of 1400…2700 mm. Data sheet A6V10405166 Length 2.7 m

For mounting the air sample smoke detector set on round and insulated ventilation ducts. Data sheet A6V10405166

To identify the location address for detector bases. Data sheet 007775 Color transparent Dimensions (W x H) 62 x 35 mm Packaging content: ...

A sealing set is necessary -> Using the mounting device -> Use of air flow pipes longer than 1 m Two seal sets are necessary -> Use o...

The cover plate provides smooth protection when no detector is inserted.

The addressable alarm indicator is used as a visual display for automatic fire detectors. He allows you to quickly identify alarming detectors tha...

Housing with seal for mounting the input/output modules in wet environments. The required metal cable glands and locknuts M20 must be ordered sep...

Input module (1 input) For switching on 1 potential-free working or normally closed contact for reporting technical conditions (e.g. door or v...

For switching on 4 independent, potential-free work or rest contacts to display technical statuses (e.g. door or ventilation control) or to trigger...

For switching on 1 potential-free working or normally closed contact for reporting technical conditions (e.g. door or ventilation control) or to ...

Zone module, external power supply, C-NET. - Connection of a detector line (collective or conventional 110 series, DS11, SynoLINE 300/600). the ...

For switching on 4 independent, potential-free work or rest contacts for reporting technical conditions (e.g. door or ventilation control) or for t...

Input/output blocks (1 input and 1 output) To switch on 1 potential-free contact to report technical conditions (e.g. door or ventilation contro...

To ensure that several branch lines do not fail in the event of a short circuit, line separators can be connected between them. The line separator ...

To ensure that several branch lines do not fail in the event of a short circuit, line separators can be connected between them. The line separator...

Manual fire alarm with resettable plastic insert For manual immediate triggering of a fire alarm. For indoor use. Direct alarm activation by pre...

FDMC295 Protective cover The protective cover protects the manual call points from accidental glass breakage.

Circuit insert with integrated line separator and built-in alarm indicator (LED). 2-color LED for alarm and test. The circuit insert can be used...

Manual call point housing for the circuit inserts FDME223, FDME224. Color ~RAL 5005 signal blue

Red signal generator (acoustic, optical with white LED, voice) The device is used to alert in an addressed fire alarm system and triggers an aco...