Produktübersicht
Hand button/interface
FH.Genius
Technical description:
Microprocessor-controlled radio hand button
Genius with integrated radio module and
permanently installed batteries to supplement
a radio network consisting of
Smoke detector Genius Plus X with the
Radio modules Basis X and/or Pro X or
Smoke alarm Genius Hx with the
Radio modules Basic and/or Pro. The
Integration into an existing radio system
Genius is possible at any time.
The radio hand button can be used for both
manual triggering of the radio system
Genius house alarm as well as a radio interface to wired systems or both at the same time.
Via two potential-free changeover contacts
the states alarm and status can be selected
to the wireless network via wire
higher-level system (e.g. building management system, telephone dialer, etc.)
to get redirected. Through additional
Inputs (alarm and acknowledgment input)
can receive alarm messages from external
Controls (e.g. burglar alarm system,
etc.) is fed into the wireless network
and therefore a comprehensive one
Alarm triggered throughout the building
become. It is also possible that
Radio system via the reset button on site
or reset via the external acknowledgment input.
An acoustic signal over 50 dB at 3m
and a visual alarm display
signal in the event of an event. The
acoustic alarm signal works with
an optimized frequency range
better for human hearing
to be perceptible.
The Genius radio hand switch has:
two permanently installed, non-removable ones
3.6V high performance lithium batteries.
This guarantees an uptime of
typically 10 years.
Through an automatic functional and
The hand button monitors itself in the self-test
self-employed. The Genius radio hand switch
has a physical
readable diagnostic memory. At the
triggering the functional test
the battery, horn and processor
tested. The operating status is with
the one integrated in the alarm trigger button,
optical display every 48 seconds
signaled. Status messages can be for
be switched off for 24 hours.
A glass pane protects the wireless hand button against manipulation
Unauthorized alarm activations. With the
The included key can do this
Housing opened and during maintenance
be made easily accessible. The
Assembly is carried out using the enclosed
Screws and dowels. The drilling template
is in the assembly instructions
easy assembly shown.
Every radio hand button comes with one
Repeater equipped. The alarm transmission from radio smoke detectors
radio smoke alarm is maximum
3 seconds. There can be up to 70 lines
and 6 collective alarm lines set
become. The single operation function
makes it possible to use the radio hand button as a
a higher-level alarm unit
operate to send alarms to everyone
Send and receive alarm lines.
When the radio network is put into operation, each line receives
automatically an identification code.
In this way, reports from neighboring areas can be sent
Radio networks with the same line setting can be ignored. It can
several lines with different
Settings, operating in parallel
be taken. The radio hand button
automatically recognizes the dismantling of a
Radio smoke alarm and failure
the radio link to another
Radio module.
Performance features:
- Microprocessor controlled radio
Hand button with integrated radio module
- Easy integration into existing ones
Radio systems Genius
- Manual alarm trigger via
Alarm button
- Alarm triggering via external
Alarm input (e.g. through building
control technology)
- 70 different lines
- Max. 30 radio participants per line
- 6 collective alarm lines
- Single operation (In this case
Setting can be done using the radio hand button,
as a higher-level alarm trigger
and acknowledgment unit)
- Repeater function
- Alarm transmission to everyone connected
Radio subscribers on the same line
- Alarm transmission via relay contacts
- Disturbance transmission to all networked
Radio subscribers on the same line
- Fault transmission via relay contacts
- Two permanently installed high-performance
Lithium batteries 3.6 V
- Acoustic alarm signaling via
50 dB/3m sound pressure
- Visual alarm and status display
- Operating life typically 10 years
- Automatic function self-test
- Readable diagnostic memory
- Integrated real-time clock
- Automatic status suppression
Night from 10:00 p.m. to 6:00 a.m. CET
- Status report for 24 hours
can be switched off
- Dismantling detection/radio
Route monitoring optional
can be activated (max. 20 radio participants
per line)
- 5 year device guarantee
Warranty conditions
(www.hekatron-brandschutz.de/ Garantie)
- Fire protection made in Germany
Nominal data:
- 2 high performance lithium batteries
3.6 V, permanently installed
- Battery capacity 2.2 Ah each
- Supply voltage (external):
10-30V DC for using the
wired interfaces
necessary
- Alarm relay: 1x changeover contact; Max.
Contact load 30V/1A
- Status relay: 1x changeover contact; Max.
Contact load 30V/1A
- Alarm input: Potential-free
NC contact
- Acknowledgment input: Potential-free
Normally open contact
- Frequency range 868.3 MHz
- Range at least 100m in the open field
- Operating ambient temperature
0°C to +55°C
- Storage temperature -10°C to +60°C
- Protection class IP 41
- Color blue, similar to RAL 5005
- Dimensions W x H x D / 130 x 130 x 32
- Connection plug-in terminals max. 0.5 mm2
rigid wires
- Weight 237g
Manufacturer: Hekatron Vertriebs GmbH
Type: Genius radio hand switch
Item no.: 31-5000013-01-XX
EAN: 4260432550085
