Aumüller chain drive KS4 800 S12 24V L E6/C-0

Produktübersicht

Application: Ventilation, RWA, ferralux®-NRWG
Integrated intelligent control electronics S12
Feedback end position “CLOSED” (max. 24V, 500 mA)

Furnishing
Additional AUMÜLLER-Click connector set for multiple operation

Options
Programming of special functions
Programmable feedback end position “OPEN” (max. 24V, 500 mA)
M-COM for automatic configuration of synchronous operation and sequence controls
Locking drives (S3 / S12) in drive network systems

TECHNICAL DATA
UN rated voltage 24V DC (19 V ... 28 V)
IN rated current 0.9 A
IA shutdown current 1.2 A
PN rated consumption 22 W
DC duty cycle 5 cycles (ED 30% - ON: 3 min. / OFF: 7 min.)
Protection class IP 32
Ambient temperature -5 °C ... +60 °C
FZ tensile force max. 400 N
FH locking force 1,800 N (depending on fastening)
Stainless steel chain, without protruding rivet heads.
Easy connection to a wing trestle.
Small bending radii enable large opening angles with low sash heights.
Connection cable halogen-free, gray 5 x 0.5 mm², ~ 2 m
v Speed ​​s < 400 8.0 mm/s 8.0 mm/s
s 500 – 600 12.0 mm/s 8.0 mm/s
s > 600 13.5 mm/s 8.0 mm/s
s stroke 50 – 1000 mm
L Total length see ordering data
Feedback contact end position “CLOSED” (max. 24V, 500 mA)
Emission sound pressure level  70 dB (A)

AUMÜLLER chain drives have an integrated cable routing with a plug connection in the housing
both drive ends for the following options:
• AUMÜLLER-Click connector solution with connection cables in different lengths
Order no.: 501251 - 3 m cable length / 501252 - 5 m cable length / 501253 - 10 m cable length
• Series connection of several drives in network systems
• Cable entry possible from both sides of the housing